egXML (anchored) indicates whether the copy text shows the exact place of reference for the note. (target end) points to the end of the span to which the note is attached, if the note is not embedded in the text at that point. indicates the person, or group of people, to whom the element content is ascribed. indicates the person, or group of people, to whom a speech act or action is directed. provides an externally-defined means of identifying the entity (or entities) being named, using a coded value of some kind. (reference) provides an explicit means of locating a full definition or identity for the entity being named by means of one or more URIs. names the unit used for the measurement Suggested values include: 1] cm (centimetres); 2] mm (millimetres); 3] in (inches); 4] line; 5] char (characters) cm (centimetres) mm (millimetres) in (inches) line lines of text char (characters) characters of text [^\p{C}\p{Z}]+ specifies the length in the units specified (\-?[\d]+/\-?[\d]+) indicates the size of the object concerned using a project-specific vocabulary combining quantity and units in a single string of words. characterizes the precision of the values specified by the other attributes. high medium low unknown where the measurement summarizes more than one observation, specifies the applicability of this measurement. Sample values include: 1] all; 2] most; 3] range [^\p{C}\p{Z}]+ points to a <handNote> element describing the hand considered responsible for the content of the element concerned. provides a coded representation of the degree of damage, either as a number between 0 (undamaged) and 1 (very extensively damaged), or as one of the codes high, medium, low, or unknown. The <damage> element with the @degree attribute should only be used where the text may be read with some confidence; text supplied from other sources should be tagged as <supplied>. high medium low unknown assigns an arbitrary number to each stretch of damage regarded as forming part of the same physical phenomenon. indicates whether or not the element bearing this attribute should be considered to mark the end of an orthographic token in the same way as whitespace. [^\p{C}\p{Z}]+ supplies the value of the date or time in a standard form, e.g. yyyy-mm-dd. specifies the earliest possible date for the event in standard form, e.g. yyyy-mm-dd. specifies the latest possible date for the event in standard form, e.g. yyyy-mm-dd. indicates the starting point of the period in standard form, e.g. yyyy-mm-dd. indicates the ending point of the period in standard form, e.g. yyyy-mm-dd. The @when attribute cannot be used with any other att.datable.w3c attributes. The @from and @notBefore attributes cannot be used together. The @to and @notAfter attributes cannot be used together. indicates one or more systems or calendars to which the date represented by the content of this element belongs. @calendar indicates one or more systems or calendars to which the date represented by the content of this element belongs, but this element has no textual content. supplies pointers to one or more definitions of named periods of time (typically <category>s or <calendar>s) within which the datable item is understood to have occurred. indicates whether or not this element is selected by default when its parent is selected. true This element is selected if its parent is selected false This element can only be selected explicitly, unless it is the only one of its kind, in which case it is selected if its parent is selected. identifies one or more declarable elements within the header, which are understood to apply to the element bearing this attribute and its content. specifies whether or not its parent element is fragmented in some way, typically by some other overlapping structure: for example a speech which is divided between two or more verse stanzas, a paragraph which is split across a page division, a verse line which is divided between two speakers. Y (yes) the element is fragmented in some (unspecified) respect N (no) the element is not fragmented, or no claim is made as to its completeness I (initial) this is the initial part of a fragmented element M (medial) this is a medial part of a fragmented element F (final) this is the final part of a fragmented element describes the status of a document either currently or, when associated with a dated element, at the time indicated. Sample values include: 1] approved; 2] candidate; 3] cleared; 4] deprecated; 5] draft; 6] embargoed; 7] expired; 8] frozen; 9] galley; 10] proposed; 11] published; 12] recommendation; 13] submitted; 14] unfinished; 15] withdrawn [^\p{C}\p{Z}]+ (certainty) signifies the degree of certainty associated with the intervention or interpretation. high medium low unknown (responsible party) indicates the agency responsible for the intervention or interpretation, for example an editor or transcriber. indicates whether this is an instant revision or not. unknown inapplicable (rendition) indicates how the element in question was rendered or presented in the source text. [^\p{C}\p{Z}]+ points to a description of the rendering or presentation used for this element in the source text. specifies the source from which some aspect of this element is drawn. (identifier) provides a unique identifier for the element bearing the attribute. (number) gives a number (or other label) for an element, which is not necessarily unique within the document. (language) indicates the language of the element content using a tag generated according to BCP 47. provides a base URI reference with which applications can resolve relative URI references into absolute URI references. signals an intention about how white space should be managed by applications. default signals that the application's default white-space processing modes are acceptable preserve indicates the intent that applications preserve all white space gives a name or other identifier for the scribe believed to be responsible for this hand. points to a full description of the scribe concerned, typically supplied by a <person> element elsewhere in the description. characterizes the particular script or writing style used by this hand, for example secretary, copperplate, Chancery, Italian, etc. points to a full description of the script or writing style used by this hand, typically supplied by a <scriptNote> element elsewhere in the description. describes the tint or type of ink, e.g. brown, or other writing medium, e.g. pencil [^\p{C}\p{Z}]+ specifies how widely this hand is used in the manuscript. sole only this hand is used throughout the manuscript major this hand is used through most of the manuscript minor this hand is used occasionally in the manuscript (MIME media type) specifies the applicable multimedia internet mail extension (MIME) media type [^\p{C}\p{Z}]+ Where the media are displayed, indicates the display width [\-+]?\d+(\.\d+)?(%|cm|mm|in|pt|pc|px|em|ex|gd|rem|vw|vh|vm) Where the media are displayed, indicates the display height [\-+]?\d+(\.\d+)?(%|cm|mm|in|pt|pc|px|em|ex|gd|rem|vw|vh|vm) (uniform resource locator) specifies the URL from which the media concerned may be obtained. (unit) indicates the units used for the measurement, usually using the standard symbol for the desired units. Suggested values include: 1] m (metre); 2] kg (kilogram); 3] s (second); 4] Hz (hertz); 5] Pa (pascal); 6] Ω (ohm); 7] L (litre); 8] t (tonne); 9] ha (hectare); 10] Å (ångström); 11] mL (millilitre); 12] cm (centimetre); 13] dB (decibel); 14] kbit (kilobit); 15] Kibit (kibibit); 16] kB (kilobyte); 17] KiB (kibibyte); 18] MB (megabyte); 19] MiB (mebibyte) m (metre) SI base unit of length kg (kilogram) SI base unit of mass s (second) SI base unit of time Hz (hertz) SI unit of frequency Pa (pascal) SI unit of pressure or stress Ω (ohm) SI unit of electric resistance L (litre) 1 dm³ t (tonne) 10³ kg ha (hectare) 1 hm² Å (ångström) 10⁻¹⁰ m mL (millilitre) cm (centimetre) dB (decibel) see remarks, below kbit (kilobit) 10³ or 1000 bits Kibit (kibibit) 2¹⁰ or 1024 bits kB (kilobyte) 10³ or 1000 bytes KiB (kibibyte) 2¹⁰ or 1024 bytes MB (megabyte) 10⁶ or 1 000 000 bytes MiB (mebibyte) 2²⁰ or 1 048 576 bytes [^\p{C}\p{Z}]+ points to a unique identifier stored in the @xml:id of a <unitDef> element that defines a unit of measure. (quantity) specifies the number of the specified units that comprise the measurement (\-?[\d]+/\-?[\d]+) (commodity) indicates the substance that is being measured [^\p{C}\p{Z}]+ The @unit attribute may be unnecessary when @unitRef is present. may be used to specify further information about the entity referenced by this name in the form of a set of whitespace-separated values, for example the occupation of a person, or the status of a place. [^\p{C}\p{Z}]+ names the notation used for the content of the element. [^\p{C}\p{Z}]+ specifies where this item is placed. Suggested values include: 1] top; 2] bottom; 3] margin; 4] opposite; 5] overleaf; 6] above; 7] right; 8] below; 9] left; 10] end; 11] inline; 12] inspace top at the top of the page bottom at the foot of the page margin in the margin (left, right, or both) opposite on the opposite, i.e. facing, page overleaf on the other side of the leaf above above the line right to the right, e.g. to the right of a vertical line of text, or to the right of a figure below below the line left to the left, e.g. to the left of a vertical line of text, or to the left of a figure end at the end of e.g. chapter or volume. inline within the body of the text. inspace in a predefined space, for example left by an earlier scribe. [^\p{C}\p{Z}]+ characterizes the element in some sense, using any convenient classification scheme or typology. [^\p{C}\p{Z}]+ (subtype) provides a sub-categorization of the element, if needed [^\p{C}\p{Z}]+ The element should not be categorized in detail with @subtype unless also categorized in general with @type specifies the destination of the reference by supplying one or more URI References supplies the sort key for this element in an index, list or group which contains it. [^\p{C}\p{Z}]+ (edition) supplies a sigil or other arbitrary identifier for the source edition in which the associated feature (for example, a page, column, or line break) occurs at this point in the text. [^\p{C}\p{Z}]+ (edition reference) provides a pointer to the source edition in which the associated feature (for example, a page, column, or line break) occurs at this point in the text. indicates the end of a span initiated by the element bearing this attribute. The element indicated by @spanTo () must follow the current element indicates the effect of the intervention, for example in the case of a deletion, strikeouts which include too much or too little text, or in the case of an addition, an insertion which duplicates some of the text already present. Sample values include: 1] duplicate; 2] duplicate-partial; 3] excessStart; 4] excessEnd; 5] shortStart; 6] shortEnd; 7] partial; 8] unremarkable [^\p{C}\p{Z}]+ documents the presumed cause for the intervention. [^\p{C}\p{Z}]+ (sequence) assigns a sequence number related to the order in which the encoded features carrying this attribute are believed to have occurred. identifies the unit of information conveyed by the element, e.g. columns, pages, volume, entry. Suggested values include: 1] volume (volume); 2] issue; 3] page (page); 4] line; 5] chapter (chapter); 6] part; 7] column; 8] entry volume (volume) the element contains a volume number. issue the element contains an issue number, or volume and issue numbers. page (page) the element contains a page number or page range. line the element contains a line number or line range. chapter (chapter) the element contains a chapter indication (number and/or title) part the element identifies a part of a book or collection. column the element identifies a column. entry the element identifies an entry number or label in a list of entries. [^\p{C}\p{Z}]+ specifies the starting point of the range of units indicated by the @unit attribute. [^\p{C}\p{Z}]+ specifies the end-point of the range of units indicated by the @unit attribute. [^\p{C}\p{Z}]+ indicates one or more locations by pointing to a <place> element or other canonical description. indicates whether the pronunciation or orthography applies to all or part of a word. Suggested values include: 1] full (full form); 2] pref (prefix); 3] suff (suffix); 4] inf (infix); 5] part (partial) full (full form) pref (prefix) suff (suffix) inf (infix) part (partial) [^\p{C}\p{Z}]+ indicates whether the name component is given in full, as an abbreviation or simply as an initial. yes (yes) the name component is spelled out in full. abb (abbreviated) the name component is given in an abbreviated form. init (initial letter) the name component is indicated only by one initial. (sort) specifies the sort order of the name component in relation to others within the name. provides a conventional name for the kind of section changing at this milestone. Suggested values include: 1] page; 2] column; 3] line; 4] book; 5] poem; 6] canto; 7] speaker; 8] stanza; 9] act; 10] scene; 11] section; 12] absent; 13] unnumbered page physical page breaks (synonymous with the <pb> element). column column breaks. line line breaks (synonymous with the <lb> element). book any units termed book, liber, etc. poem individual poems in a collection. canto cantos or other major sections of a poem. speaker changes of speaker or narrator. stanza stanzas within a poem, book, or canto. act acts within a play. scene scenes within a play or act. section sections of any kind. absent passages not present in the reference edition. unnumbered passages present in the text, but not to be included as part of the reference. [^\p{C}\p{Z}]+ (paragraph) marks paragraphs in prose. [3.1. Paragraphs 7.2.5. Speech Contents] Abstract model violation: Paragraphs may not occur inside other paragraphs or ab elements. Abstract model violation: Lines may not contain higher-level structural elements such as div, p, or ab, unless p is a child of figure or note, or is a descendant of floatingText. (foreign) identifies a word or phrase as belonging to some language other than that of the surrounding text. [3.3.2.1. Foreign Words or Expressions] (highlighted) marks a word or phrase as graphically distinct from the surrounding text, for reasons concerning which no claim is made. [3.3.2.2. Emphatic Words and Phrases 3.3.2. Emphasis, Foreign Words, and Unusual Language] (quotation) contains a phrase or passage attributed by the narrator or author to some agency external to the text. [3.3.3. Quotation 4.3.1. Grouped Texts] (cited quotation) contains a quotation from some other document, together with a bibliographic reference to its source. In a dictionary it may contain an example text with at least one occurrence of the word form, used in the sense being described, or a translation of the headword, or an example. [3.3.3. Quotation 4.3.1. Grouped Texts 9.3.5.1. Examples] (description) contains a short description of the purpose, function, or use of its parent element, or when the parent is a documentation element, describes or defines the object being documented. [22.4.1. Description of Components] Information about a deprecation should only be present in a specification element that is being deprecated: that is, only an element that has a @validUntil attribute should have a child <desc type="deprecationInfo">. characterizes the element in some sense, using any convenient classification scheme or typology. Suggested values include: 1] deprecationInfo (deprecation information) deprecationInfo (deprecation information) This element describes why or how its parent element is being deprecated, typically including recommendations for alternate encoding. [^\p{C}\p{Z}]+ (gloss) identifies a phrase or word used to provide a gloss or definition for some other word or phrase. [3.4.1. Terms and Glosses 22.4.1. Description of Components] (term) contains a single-word, multi-word, or symbolic designation which is regarded as a technical term. [3.4.1. Terms and Glosses] (Latin for thus or so) contains text reproduced although apparently incorrect or inaccurate. [3.5.1. Apparent Errors] (correction) contains the correct form of a passage apparently erroneous in the copy text. [3.5.1. Apparent Errors] (choice) groups a number of alternative encodings for the same point in a text. [3.5. Simple Editorial Changes] (regularization) contains a reading which has been regularized or normalized in some sense. [3.5.2. Regularization and Normalization 12. Critical Apparatus] (original form) contains a reading which is marked as following the original, rather than being normalized or corrected. [3.5.2. Regularization and Normalization 12. Critical Apparatus] (gap) indicates a point where material has been omitted in a transcription, whether for editorial reasons described in the TEI header, as part of sampling practice, or because the material is illegible, invisible, or inaudible. [3.5.3. Additions, Deletions, and Omissions] names the unit used for the measurement chars The unit of the gap in this REED record (if known) is measured in characters lines The unit of the gap in this REED record (if known) is measured in lines mm The unit of the gap in this REED record (if known) is measured in millimetres (reason) gives the reason for omission Suggested values include: 1] cancelled (cancelled); 2] deleted (deleted); 3] editorial (editorial); 4] illegible (illegible); 5] inaudible (inaudible); 6] irrelevant (irrelevant); 7] sampling (sampling) cancelled (cancelled) deleted (deleted) editorial (editorial) for features omitted from transcription due to editorial policy illegible (illegible) inaudible (inaudible) irrelevant (irrelevant) sampling (sampling) [^\p{C}\p{Z}]+ (agent) in the case of text omitted because of damage, categorizes the cause of the damage, if it can be identified. Sample values include: 1] rubbing (rubbing); 2] mildew (mildew); 3] smoke (smoke) [^\p{C}\p{Z}]+ (addition) contains letters, words, or phrases inserted in the source text by an author, scribe, or a previous annotator or corrector. [3.5.3. Additions, Deletions, and Omissions] specifies where this item is placed. below The addition to this REED record was written below the line bottom The addition to this REED record was written at the foot of the page top The addition to this REED record was written at the top of the page opposite The addition to this REED record was written on the opposite, i.e. facing, page overleaf The addition to this REED record was written on the other side of the leaf above The addition to this REED record was written above the line inspace The addition to this REED record was written in a predefined space, for example left by an earlier scribe. over The addition to this REED record was written over existing text (deletion) contains a letter, word, or passage deleted, marked as deleted, or otherwise indicated as superfluous or spurious in the copy text by an author, scribe, or a previous annotator or corrector. [3.5.3. Additions, Deletions, and Omissions] characterizes the element in some sense, using any convenient classification scheme or typology. Suggested values include: 1] erasure; 2] other erasure The deletion in the REED record was an erasure other The deletion in the REED record was of another type. (If you use this more than a handful of times we should update the TEI ODD Customisation.) [^\p{C}\p{Z}]+ (unclear) contains a word, phrase, or passage which cannot be transcribed with certainty because it is illegible or inaudible in the source. [11.3.3.1. Damage, Illegibility, and Supplied Text 3.5.3. Additions, Deletions, and Omissions] indicates why the material is hard to transcribe. Suggested values include: 1] illegible (illegible); 2] inaudible (inaudible); 3] faded (faded); 4] background_noise (background_noise); 5] eccentric_ductus (eccentric_ductus) illegible (illegible) inaudible (inaudible) faded (faded) background_noise (background_noise) eccentric_ductus (eccentric_ductus) indicates illegibility due to an unusual, awkward, or incompetent execution of a glyph or glyphs [^\p{C}\p{Z}]+ Where the difficulty in transcription arises from damage, categorizes the cause of the damage, if it can be identified. Sample values include: 1] rubbing; 2] mildew; 3] smoke [^\p{C}\p{Z}]+ (name, proper noun) contains a proper noun or noun phrase. [3.6.1. Referring Strings] (referencing string) contains a general purpose name or referring string. [13.2.1. Personal Names 3.6.1. Referring Strings] (address) contains a postal address, for example of a publisher, an organization, or an individual. [3.6.2. Addresses 2.2.4. Publication, Distribution, Licensing, etc. 3.12.2.4. Imprint, Size of a Document, and Reprint Information] (address line) contains one line of a postal address. [3.6.2. Addresses 2.2.4. Publication, Distribution, Licensing, etc. 3.12.2.4. Imprint, Size of a Document, and Reprint Information] (measure) contains a word or phrase referring to some quantity of an object or commodity, usually comprising a number, a unit, and a commodity name. [3.6.3. Numbers and Measures] specifies the type of measurement in any convenient typology. [^\p{C}\p{Z}]+ (date) contains a date in any format. [3.6.4. Dates and Times 2.2.4. Publication, Distribution, Licensing, etc. 2.6. The Revision Description 3.12.2.4. Imprint, Size of a Document, and Reprint Information 15.2.3. The Setting Description 13.4. Dates] (certainty) signifies the degree of certainty associated with the intervention or interpretation. high There is a high degree of certainty about this date medium There is a medium degree of certainty about this date low There is a low degree of certainty about this date unknown The date is unknown characterizes the element in some sense, using any convenient classification scheme or typology. circa The type of date in this REED record is an approximate date old_style The type of date in this REED record is an old style date regnal The type of date in this REED record is a regnal date other The type of date in this REED record is another form of non-standard date (abbreviation) contains an abbreviation of any sort. [3.6.5. Abbreviations and Their Expansions] (expansion) contains the expansion of an abbreviation. [3.6.5. Abbreviations and Their Expansions] (pointer) defines a pointer to another location. [3.7. Simple Links and Cross-References 16.1. Links] Only one of the attributes @target and @cRef may be supplied on . (reference) defines a reference to another location, possibly modified by additional text or comment. [3.7. Simple Links and Cross-References 16.1. Links] Only one of the attributes @target' and @cRef' may be supplied on (list) contains any sequence of items organized as a list. [3.8. Lists] The content of a "gloss" list should include a sequence of one or more pairs of a label element followed by an item element (type) describes the nature of the items in the list. Suggested values include: 1] gloss (gloss); 2] index (index); 3] instructions (instructions); 4] litany (litany); 5] syllogism (syllogism) gloss (gloss) each list item glosses some term or concept, which is given by a <label> element preceding the list item. index (index) each list item is an entry in an index such as the alphabetical topical index at the back of a print volume. instructions (instructions) each list item is a step in a sequence of instructions, as in a recipe. litany (litany) each list item is one of a sequence of petitions, supplications or invocations, typically in a religious ritual. syllogism (syllogism) each list item is part of an argument consisting of two or more propositions and a final conclusion derived from them. [^\p{C}\p{Z}]+ (item) contains one component of a list. [3.8. Lists 2.6. The Revision Description] (label) contains any label or heading used to identify part of a text, typically but not exclusively in a list or glossary. [3.8. Lists] (heading) contains any type of heading, for example the title of a section, or the heading of a list, glossary, manuscript description, etc. [4.2.1. Headings and Trailers] (note) contains a note or annotation. [3.9.1. Notes and Simple Annotation 2.2.6. The Notes Statement 3.12.2.8. Notes and Statement of Language 9.3.5.4. Notes within Entries] specifies where this item is placed. bottom The note to this REED Record is provided at the foot of the page margin_left The note to this REED Record is provided in the left margin margin_right The note to this REED Record is provided in the right margin top The note to this REED Record is provided at the top of the page opposite The note to this REED Record is provided on the opposite, i.e. facing, page overleaf The note to this REED Record is provided on the other side of the leaf end The note to this REED Record is provided at the end of e.g. chapter or volume. inline The note to this REED Record is provided within the body of the text. inspace The note to this REED Record is provided in a predefined space, for example left by an earlier scribe. over The note to this REED Record is provided written over existing text characterizes the element in some sense, using any convenient classification scheme or typology. antiquarian_source The note to this REED Record is from antiquarian source edDesc This note is the editorial note on a print source from which record/s were derived foot The note to this REED Record is at the foot of the leaf marginal The note to this REED Record is in the margin subhead The note to this REED Record is a subheading techDesc This note is the full bibliographic citation for a print source from which record/s were derived editorial The note to this REED Record is an editorial note collation This note to this REED Record contains collated text other The note to this REED Record is another type of note. (If you use this more than a handful of times we should update the TEI ODD Customisation.) real This note satisfies the CWRC note entity attribute researchNote This note satisfies the CWRC research note attribute translation This is the original language in which the record was transcribed event This provides a summary of an event or events described in the record (graphic) indicates the location of a graphic or illustration, either forming part of a text, or providing an image of it. [3.10. Graphics and Other Non-textual Components 11.1. Digital Facsimiles] (milestone) marks a boundary point separating any kind of section of a text, typically but not necessarily indicating a point at which some part of a standard reference system changes, where the change is not represented by a structural element. [3.11.3. Milestone Elements] (page beginning) marks the beginning of a new page in a paginated document. [3.11.3. Milestone Elements] characterizes the element in some sense, using any convenient classification scheme or typology. folio The page break in this REED record is the beginning of a new folio membrane The page break in this REED record is the beginning of a new membrane page The page break in this REED record is the beginning of a new page sheet The page break in this REED record is the beginning of a new sheet signature The page break in this REED record is the beginning of new page marked with a signature single_membrane The page break in this REED record is the beginning of a new single_membrane single_sheet The page break in this REED record is the beginning of a new single_sheet other The page break in this REED record is the another type of page break. (If you use this more than a handful of times we should update the TEI ODD Customisation.) (line beginning) marks the beginning of a new (typographic) line in some edition or version of a text. [3.11.3. Milestone Elements 7.2.5. Speech Contents] (column beginning) marks the beginning of a new column of a text on a multi-column page. [3.11.3. Milestone Elements] (monographic level) contains bibliographic elements describing an item (e.g. a book or journal) published as an independent item (i.e. as a separate physical object). [3.12.2.1. Analytic, Monographic, and Series Levels] (author) in a bibliographic reference, contains the name(s) of an author, personal or corporate, of a work; for example in the same form as that provided by a recognized bibliographic name authority. [3.12.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement] contains a secondary statement of responsibility for a bibliographic item, for example the name of an individual, institution or organization, (or of several such) acting as editor, compiler, translator, etc. [3.12.2.2. Titles, Authors, and Editors] (statement of responsibility) supplies a statement of responsibility for the intellectual content of a text, edition, recording, or series, where the specialized elements for authors, editors, etc. do not suffice or do not apply. May also be used to encode information about individuals or organizations which have played a role in the production or distribution of a bibliographic work. [3.12.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement 2.2.2. The Edition Statement 2.2.5. The Series Statement] (responsibility) contains a phrase describing the nature of a person's intellectual responsibility, or an organization's role in the production or distribution of a work. [3.12.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement 2.2.2. The Edition Statement 2.2.5. The Series Statement] (title) contains a title for any kind of work. [3.12.2.2. Titles, Authors, and Editors 2.2.1. The Title Statement 2.2.5. The Series Statement] classifies the title according to some convenient typology. database title of a database edName This title is the editorially supplied name of record/s derived from a print source journal title of a journal main a main title monograph title of a mongraph pamphlet title of a pamphlet periodical title of a periodical play title of a play record_head title of a record heading section title of a section sourceName This is the title of the print source from which record/s were derived title_page title of a title page indicates the bibliographic level for a title, that is, whether it identifies an article, book, journal, series, or unpublished material. a analytic level of title j journal or serial level of title m monographic level of title groups information relating to the publication or distribution of a bibliographic item. [3.12.2.4. Imprint, Size of a Document, and Reprint Information] (publisher) provides the name of the organization responsible for the publication or distribution of a bibliographic item. [3.12.2.4. Imprint, Size of a Document, and Reprint Information 2.2.4. Publication, Distribution, Licensing, etc.] (scope of bibliographic reference) defines the scope of a bibliographic reference, for example as a list of page numbers, or a named subdivision of a larger work. [3.12.2.5. Scopes and Ranges in Bibliographic Citations] (cited range) defines the range of cited content, often represented by pages or other units [3.12.2.5. Scopes and Ranges in Bibliographic Citations] (publication place) contains the name of the place where a bibliographic item was published. [3.12.2.4. Imprint, Size of a Document, and Reprint Information] (bibliographic citation) contains a loosely-structured bibliographic citation of which the sub-components may or may not be explicitly tagged. [3.12.1. Methods of Encoding Bibliographic References and Lists of References 2.2.7. The Source Description 15.3.2. Declarable Elements] (structured bibliographic citation) contains a structured bibliographic citation, in which only bibliographic sub-elements appear and in a specified order. [3.12.1. Methods of Encoding Bibliographic References and Lists of References 2.2.7. The Source Description 15.3.2. Declarable Elements] (citation list) contains a list of bibliographic citations of any kind. [3.12.1. Methods of Encoding Bibliographic References and Lists of References 2.2.7. The Source Description 15.3.2. Declarable Elements] contains or references some other bibliographic item which is related to the present one in some specified manner, for example as a constituent or alternative version of it. [3.12.2.7. Related Items] If the @target attribute on is used, the relatedItem element must be empty A relatedItem element should have either a 'target' attribute or a child element to indicate the related bibliographic item points to the related bibliographic element by means of an absolute or relative URI reference (verse line) contains a single, possibly incomplete, line of verse. [3.13.1. Core Tags for Verse 3.13. Passages of Verse or Drama 7.2.5. Speech Contents] Abstract model violation: Lines may not contain lines or lg elements. (line group) contains one or more verse lines functioning as a formal unit, e.g. a stanza, refrain, verse paragraph, etc. [3.13.1. Core Tags for Verse 3.13. Passages of Verse or Drama 7.2.5. Speech Contents] An lg element must contain at least one child l, lg, or gap element. Abstract model violation: Lines may not contain line groups. (speech) contains an individual speech in a performance text, or a passage presented as such in a prose or verse text. [3.13.2. Core Tags for Drama 3.13. Passages of Verse or Drama 7.2.2. Speeches and Speakers] contains a specialized form of heading or label, giving the name of one or more speakers in a dramatic text or fragment. [3.13.2. Core Tags for Drama] (stage direction) contains any kind of stage direction within a dramatic text or fragment. [3.13.2. Core Tags for Drama 3.13. Passages of Verse or Drama 7.2.4. Stage Directions] indicates the kind of stage direction. Suggested values include: 1] setting; 2] entrance; 3] exit; 4] business; 5] novelistic; 6] delivery; 7] modifier; 8] location; 9] mixed setting describes a setting. entrance describes an entrance. exit describes an exit. business describes stage business. novelistic is a narrative, motivating stage direction. delivery describes how a character speaks. modifier gives some detail about a character. location describes a location. mixed more than one of the above [^\p{C}\p{Z}]+ (text language) describes the languages and writing systems identified within the bibliographic work being described, rather than its description. [3.12.2.4. Imprint, Size of a Document, and Reprint Information 10.6.6. Languages and Writing Systems] (main language) supplies a code which identifies the chief language used in the bibliographic work. (other languages) one or more codes identifying any other languages used in the bibliographic work. (normalized) provides the normalized/standardized form of information present in the source text in a non-normalized form (original) gives the original string or is the empty string when the element does not appear in the source text. provides a lemma (base form) for the word, typically uninflected and serving both as an identifier (e.g. in dictionary contexts, as a headword), and as a basis for potential inflections. provides a pointer to a definition of the lemma for the word, for example in an online lexicon. (part of speech) indicates the part of speech assigned to a token (i.e. information on whether it is a noun, adjective, or verb), usually according to some official reference vocabulary (e.g. for German: STTS, for English: CLAWS, for Polish: NKJP, etc.). (morphosyntactic description) supplies morphosyntactic information for a token, usually according to some official reference vocabulary (e.g. for German: STTS-large tagset; for a feature description system designed as (pragmatically) universal, see Universal Features). when present, it provides information on whether the token in question is adjacent to another, and if so, on which side. The definition of this attribute is adapted from ISO MAF (Morpho-syntactic Annotation Framework), ISO 24611:2012. no (the token is not adjacent to another) left (there is no whitespace on the left side of the token) right (there is no whitespace on the right side of the token) both (there is no whitespace on either side of the token) overlap (the token overlaps with another; other devices (specifying the extent and the area of overlap) are needed to more precisely locate this token in the character stream) (analysis) indicates one or more elements containing interpretations of the element on which the @ana attribute appears. (word) represents a grammatical (not necessarily orthographic) word. [17.1. Linguistic Segment Categories 17.4.2. Lightweight Linguistic Annotation] associates an interpretative annotation directly with a span of text. [17.3. Spans and Interpretations] Only one of the attributes @target and @from may be supplied on Only one of the attributes @target and @to may be supplied on If @to is supplied on , @from must be supplied as well The attributes @to and @from on may each contain only a single value indicates what kind of phenomenon is being noted in the passage. Sample values include: 1] image; 2] character; 3] theme; 4] allusion [^\p{C}\p{Z}]+ gives the identifier of the node which is the starting point of the span of text being annotated; if not accompanied by a @to attribute, gives the identifier of the node of the entire span of text being annotated. gives the identifier of the node which is the end-point of the span of text being annotated. (setting description) describes the setting or settings within which a language interaction takes place, or other places otherwise referred to in a text, edition, or metadata. [15.2. Contextual Information 2.4. The Profile Description] indicates type of entry, in dictionaries with multiple types. Suggested values include: 1] main; 2] hom (homograph); 3] xref (cross reference); 4] affix; 5] abbr (abbreviation); 6] supplemental; 7] foreign main a main entry (default). hom (homograph) groups information relating to one homograph within an entry. xref (cross reference) a reduced entry whose only function is to point to another main entry (e.g. for forms of an irregular verb or for variant spellings: was pointing to be, or esthete to aesthete). affix an entry for a prefix, infix, or suffix. abbr (abbreviation) an entry for an abbreviation. supplemental a supplemental entry (for use in dictionaries which issue supplements to their main work in which they include updated information about entries). foreign an entry for a foreign word in a monolingual dictionary. [^\p{C}\p{Z}]+ (expand) gives an expanded form of information presented more concisely in the dictionary (split) gives the list of split values for a merged form (value) gives a value which lacks any realization in the printed source text. (location) indicates an <anchor> element typically elsewhere in the document, but possibly in another document, which is the original location of this component. (merged into) gives a reference to another element, where the original appears as a merged form. (optional) indicates whether the element is optional or not (entry) contains a single structured entry in any kind of lexical resource, such as a dictionary or lexicon. [9.1. Dictionary Body and Overall Structure 9.2. The Structure of Dictionary Entries] (homograph) groups information relating to one homograph within an entry. [9.2. The Structure of Dictionary Entries] groups together all information relating to one word sense in a dictionary entry, for example definitions, examples, and translation equivalents. [9.2. The Structure of Dictionary Entries] gives the nesting depth of this sense. (form information group) groups all the information on the written and spoken forms of one headword. [9.3.1. Information on Written and Spoken Forms] classifies form as simple, compound, etc. Suggested values include: 1] simple; 2] lemma; 3] variant; 4] compound; 5] derivative; 6] inflected; 7] phrase simple single free lexical item lemma the headword itself variant a variant form compound word formed from simple lexical items derivative word derived from headword inflected word in other than usual dictionary form phrase multiple-word lexical item [^\p{C}\p{Z}]+ (orthographic form) gives the orthographic form of a dictionary headword. [9.3.1. Information on Written and Spoken Forms] gives the type of spelling. [^\p{C}\p{Z}]+ (pronunciation) contains the pronunciation(s) of the word. [9.3.1. Information on Written and Spoken Forms] (hyphenation) contains a hyphenated form of a dictionary headword, or hyphenation information in some other form. [9.3.1. Information on Written and Spoken Forms] (syllabification) contains the syllabification of the headword. [9.3.1. Information on Written and Spoken Forms] (grammatical information) within an entry in a dictionary or a terminological data file, contains grammatical information relating to a term, word, or form. [9.3.2. Grammatical Information] classifies the grammatical information given according to some convenient typology—in the case of terminological information, preferably the dictionary of data element types specified in ISO 12620. Sample values include: 1] pos (part of speech); 2] gen (gender); 3] num (number); 4] animate; 5] proper [^\p{C}\p{Z}]+ (gender) identifies the morphological gender of a lexical item, as given in the dictionary. [9.3.1. Information on Written and Spoken Forms] (number) indicates grammatical number associated with a form, as given in a dictionary. [9.3.1. Information on Written and Spoken Forms 9.3.2. Grammatical Information] (case) contains grammatical case information given by a dictionary for a given form. [9.3.1. Information on Written and Spoken Forms] (person) contains an indication of the grammatical person (1st, 2nd, 3rd, etc.) associated with a given inflected form in a dictionary. [9.3.1. Information on Written and Spoken Forms] (tense) indicates the grammatical tense associated with a given inflected form in a dictionary. [9.3.1. Information on Written and Spoken Forms] (mood) contains information about the grammatical mood of verbs (e.g. indicative, subjunctive, imperative). [9.3.1. Information on Written and Spoken Forms] (grammatical information group) groups morpho-syntactic information about a lexical item, e.g. <pos>, <gen>, <number>, <case>, or <iType> (inflectional class). [9.3.2. Grammatical Information] (part of speech) indicates the part of speech assigned to a dictionary headword such as noun, verb, or adjective. [9.3.2. Grammatical Information] (collocate) contains any sequence of words that co-occur with the headword with significant frequency. [9.3.2. Grammatical Information] (definition) contains definition text in a dictionary entry. [9.3.3.1. Definitions] (etymology) encloses the etymological information in a dictionary entry. [9.3.4. Etymological Information] (language name) contains the name of a language mentioned in etymological or other linguistic discussion. [9.3.4. Etymological Information] (usage) contains usage information in a dictionary entry. [9.3.5.2. Usage Information and Other Labels] classifies the usage information using any convenient typology. Sample values include: 1] geo (geographic); 2] time; 3] dom (domain); 4] register (register); 5] style; 6] plev (preference level); 7] lang (language); 8] gram (grammatical); 9] syn (synonym); 10] hyper (hypernym); 11] colloc (collocation); 12] comp (complement); 13] obj (object); 14] subj (subject); 15] verb; 16] hint [^\p{C}\p{Z}]+ (cross-reference phrase) contains a phrase, sentence, or icon referring the reader to some other location in this or another text. [9.3.5.3. Cross-References to Other Entries] indicates the type of cross reference, using any convenient typology. Sample values include: 1] syn (synonym); 2] etym (etymological); 3] cf (compare or consult); 4] illus (illustration) [^\p{C}\p{Z}]+ (related entry) contains a dictionary entry for a lexical item related to the headword, such as a compound phrase or derived form, embedded inside a larger entry. [9.3.6. Related Entries] (role) indicates the kind of information held in this cell or in each cell of this row. Suggested values include: 1] label; 2] data label labelling or descriptive information only. data data values. [^\p{C}\p{Z}]+ (rows) indicates the number of rows occupied by this cell or row. (columns) indicates the number of columns occupied by this cell or row. (table) contains text displayed in tabular form, in rows and columns. [14.1.1. TEI Tables] (rows) indicates the number of rows in the table. (columns) indicates the number of columns in each row of the table. (row) contains one row of a table. [14.1.1. TEI Tables] (cell) contains one cell of a table. [14.1.1. TEI Tables] (figure) groups elements representing or containing graphic information such as an illustration, formula, or figure. [14.4. Specific Elements for Graphic Images] (description of figure) contains a brief prose description of the appearance or content of a graphic figure, for use when documenting an image without displaying it. [14.4. Specific Elements for Graphic Images] specifies a regular expression against which the values of other attributes can be matched. specifies a replacement pattern, that is, the skeleton of a relative or absolute URI containing references to groups in the @matchPattern which, once subpattern substitution has been performed, complete the URI. (TEI header) supplies descriptive and declarative metadata associated with a digital resource or set of resources. [2.1.1. The TEI Header and Its Components 15.1. Varieties of Composite Text] (file description) contains a full bibliographic description of an electronic file. [2.2. The File Description 2.1.1. The TEI Header and Its Components] (title statement) groups information about the title of a work and those responsible for its content. [2.2.1. The Title Statement 2.2. The File Description] (funding body) specifies the name of an individual, institution, or organization responsible for the funding of a project or text. [2.2.1. The Title Statement] (edition statement) groups information relating to one edition of a text. [2.2.2. The Edition Statement 2.2. The File Description] (edition) describes the particularities of one edition of a text. [2.2.2. The Edition Statement] (extent) describes the approximate size of a text stored on some carrier medium or of some other object, digital or non-digital, specified in any convenient units. [2.2.3. Type and Extent of File 2.2. The File Description 3.12.2.4. Imprint, Size of a Document, and Reprint Information 10.7.1. Object Description] (publication statement) groups information concerning the publication or distribution of an electronic or other text. [2.2.4. Publication, Distribution, Licensing, etc. 2.2. The File Description] (distributor) supplies the name of a person or other agency responsible for the distribution of a text. [2.2.4. Publication, Distribution, Licensing, etc.] (release authority) supplies the name of a person or other agency responsible for making a work available, other than a publisher or distributor. [2.2.4. Publication, Distribution, Licensing, etc.] (identifier) supplies any form of identifier used to identify some object, such as a bibliographic item, a person, a title, an organization, etc. in a standardized way. [13.3.1. Basic Principles 2.2.4. Publication, Distribution, Licensing, etc. 2.2.5. The Series Statement 3.12.2.4. Imprint, Size of a Document, and Reprint Information] categorizes the identifier, for example as an ISBN, Social Security number, etc. authorSurname This idno is an author surname publication This idno is the name of a short-title catalogue pubNumber This idno is a publication given as an ID number repository This idno is a repository given as an ID number shelfmark This idno is a shelfmark ID number shortTitle This idno is a shortened title other This idno is other ID number. (If you use this more than a handful of times we should update the TEI ODD Customisation.) ISBN ISBN number (availability) supplies information about the availability of a text, for example any restrictions on its use or distribution, its copyright status, any licence applying to it, etc. [2.2.4. Publication, Distribution, Licensing, etc.] (status) supplies a code identifying the current availability of the text. free (free) the text is freely available. unknown (unknown) the status of the text is unknown. restricted (restricted) the text is not freely available. contains information about a licence or other legal agreement applicable to the text. [2.2.4. Publication, Distribution, Licensing, etc.] (series statement) groups information about the series, if any, to which a publication belongs. [2.2.5. The Series Statement 2.2. The File Description] (source description) describes the source(s) from which an electronic text was derived or generated, typically a bibliographic description in the case of a digitized text, or a phrase such as "born digital" for a text which has no previous existence. [2.2.7. The Source Description] (encoding description) documents the relationship between an electronic text and the source or sources from which it was derived. [2.3. The Encoding Description 2.1.1. The TEI Header and Its Components] (project description) describes in detail the aim or purpose for which an electronic file was encoded, together with any other relevant information concerning the process by which it was assembled or collected. [2.3.1. The Project Description 2.3. The Encoding Description 15.3.2. Declarable Elements] (editorial practice declaration) provides details of editorial principles and practices applied during the encoding of a text. [2.3.3. The Editorial Practices Declaration 2.3. The Encoding Description 15.3.2. Declarable Elements] (tagging declaration) provides detailed information about the tagging applied to a document. [2.3.4. The Tagging Declaration 2.3. The Encoding Description] indicates whether the element types listed exhaustively include all those found within <text>, or represent only a subset. (element usage) documents the usage of a specific element within a specified document. [2.3.4. The Tagging Declaration] (generic identifier) specifies the name (generic identifier) of the element indicated by the tag, within the namespace indicated by the parent <namespace> element. specifies the number of occurrences of this element within the text. (with unique identifier) specifies the number of occurrences of this element within the text which bear a distinct value for the global @xml:id attribute. (namespace) supplies the formal name of the namespace to which the elements documented by its children belong. [2.3.4. The Tagging Declaration] specifies the full formal name of the namespace concerned. (references declaration) specifies how canonical references are constructed for this text. [2.3.6.3. Milestone Method 2.3. The Encoding Description 2.3.6. The Reference System Declaration] (prefix definition) defines a prefixing scheme used in teidata.pointer values, showing how abbreviated URIs using the scheme may be expanded into full URIs. [16.2.3. Using Abbreviated Pointers] supplies a name which functions as the prefix for an abbreviated pointing scheme such as a private URI scheme. The prefix constitutes the text preceding the first colon. [a-z][a-z0-9\+\.\-]* (list of prefix definitions) contains a list of definitions of prefixing schemes used in teidata.pointer values, showing how abbreviated URIs using each scheme may be expanded into full URIs. [16.2.3. Using Abbreviated Pointers] (classification declarations) contains one or more taxonomies defining any classificatory codes used elsewhere in the text. [2.3.7. The Classification Declaration 2.3. The Encoding Description] (taxonomy) defines a typology either implicitly, by means of a bibliographic citation, or explicitly by a structured taxonomy. [2.3.7. The Classification Declaration] (category) contains an individual descriptive category, possibly nested within a superordinate category, within a user-defined taxonomy. [2.3.7. The Classification Declaration] (category description) describes some category within a taxonomy or text typology, either in the form of a brief prose description or in terms of the situational parameters used by the TEI formal <textDesc>. [2.3.7. The Classification Declaration] (text-profile description) provides a detailed description of non-bibliographic aspects of a text, specifically the languages and sublanguages used, the situation in which it was produced, the participants and their setting. [2.4. The Profile Description 2.1.1. The TEI Header and Its Components] (language usage) describes the languages, sublanguages, registers, dialects, etc. represented within a text. [2.4.2. Language Usage 2.4. The Profile Description 15.3.2. Declarable Elements] (language) characterizes a single language or sublanguage used within a text. [2.4.2. Language Usage] (identifier) Supplies a language code constructed as defined in BCP 47 which is used to identify the language documented by this element, and which is referenced by the global @xml:lang attribute. specifies the approximate percentage (by volume) of the text which uses this language. (calendar description) contains a description of the calendar system used in any dating expression found in the text. [2.4. The Profile Description 2.4.5. Calendar Description] (calendar) describes a calendar or dating system used in a dating formula in the text. [2.4.5. Calendar Description] (non-TEI metadata) provides a container element into which metadata in non-TEI formats may be placed. [2.5. Non-TEI Metadata] (revision description) summarizes the revision history for a file. [2.6. The Revision Description 2.1.1. The TEI Header and Its Components] (change) documents a change or set of changes made during the production of a source document, or during the revision of an electronic file. [2.6. The Revision Description 2.4.1. Creation 11.7. Identifying Changes and Revisions] (target) points to one or more elements that belong to this change. (corresponds) points to elements that correspond to the current element in some way. points to an element that is the same as the current element. points to the next element of a virtual aggregate of which the current element is part. (previous) points to the previous element of a virtual aggregate of which the current element is part. (link) defines an association or hypertextual link among elements or passages, of some type not more precisely specifiable by other elements. [16.1. Links] You must supply at least two values for @target or on (anonymous block) contains any arbitrary component-level unit of text, acting as an anonymous container for phrase or inter level elements analogous to, but without the semantic baggage of, a paragraph. [16.3. Blocks, Segments, and Anchors] Abstract model violation: ab may not occur inside paragraphs or other ab elements. Abstract model violation: Lines may not contain higher-level divisions such as p or ab, unless ab is a child of figure or note, or is a descendant of floatingText. characterizes the element in some sense, using any convenient classification scheme or typology. edDesc This ab is the editorial note on a manuscript source from which record/s were derived exdent indent head initial_letter opener signature subhead table techDesc This ab is the technical description for a manuscript source from which record/s were derived other (anchor point) attaches an identifier to a point within a text, whether or not it corresponds with a textual element. [8.4.2. Synchronization and Overlap 16.5. Correspondence and Alignment] (arbitrary segment) represents any segmentation of text below the chunk level. [16.3. Blocks, Segments, and Anchors 6.2. Components of the Verse Line 7.2.5. Speech Contents] characterizes the element in some sense, using any convenient classification scheme or typology. closer signed signed_mark table identifies the text types or classifications applicable to this item by pointing to other elements or resources defining the classification concerned. (manuscript description) contains a description of a single identifiable manuscript or other text-bearing object such as early printed books. [10.1. Overview] (catchwords) describes the system used to ensure correct ordering of the quires or similar making up a codex, incunable, or other object typically by means of annotations at the foot of the page. [10.3.7. Catchwords, Signatures, Secundo Folio] The element should not be used outside of msDesc. (dimensions) contains a dimensional specification. [10.3.4. Dimensions] The element may appear once only The element may appear once only The element may appear once only indicates which aspect of the object is being measured. Sample values include: 1] leaves; 2] ruled; 3] pricked; 4] written; 5] miniatures; 6] binding; 7] box [^\p{C}\p{Z}]+ contains any single measurement forming part of a dimensional specification of some sort. [10.3.4. Dimensions] (height) contains a measurement measured along the axis at a right angle to the bottom of the object. [10.3.4. Dimensions] (depth) contains a measurement from the front to the back of an object, perpendicular to the measurement given by the <width> element. [10.3.4. Dimensions] (width) contains a measurement of an object along the axis parallel to its bottom, e.g. perpendicular to the spine of a book or codex. [10.3.4. Dimensions] (heraldry) contains a heraldic formula or phrase, typically found as part of a blazon, coat of arms, etc. [10.3.8. Heraldry] (locus) defines a location within a manuscript, manuscript part, or other object typically as a (possibly discontinuous) sequence of folio references. [10.3.5. References to Locations within a Manuscript] (scheme) identifies the foliation scheme in terms of which the location is being specified by pointing to some <foliation> element defining it, or to some other equivalent resource. (from) specifies the starting point of the location in a normalized form, typically a page number. [^\p{C}\p{Z}]+ (to) specifies the end-point of the location in a normalized form, typically as a page number. [^\p{C}\p{Z}]+ (locus group) groups a number of locations which together form a distinct but discontinuous item within a manuscript, manuscript part, or other object. [10.3.5. References to Locations within a Manuscript] (scheme) identifies the foliation scheme in terms of which all the locations contained by the group are specified by pointing to some <foliation> element defining it, or to some other equivalent resource. (material) contains a word or phrase describing the material of which the object being described is composed. [10.3.2. Material and Object Type] describes the function or use of the material in relation to the object as a whole. Sample values include: 1] binding; 2] endband; 3] slipcase; 4] support; 5] tie [^\p{C}\p{Z}]+ identifies one or more elements to which the metamark applies. (object type) contains a word or phrase describing the type of object being referred to. [10.3.2. Material and Object Type] (origin date) contains any form of date, used to identify the date of origin for a manuscript, manuscript part, or other object. [10.3.1. Origination] (origin place) contains any form of place name, used to identify the place of origin for a manuscript, manuscript part, or other object. [10.3.1. Origination] (second folio) marks the word or words taken from a fixed point in a codex (typically the beginning of the second leaf) in order to provide a unique identifier for it. [10.3.7. Catchwords, Signatures, Secundo Folio] The element should not be used outside of msDesc. (signatures) contains discussion of the leaf or quire signatures found within a codex or similar object. [10.3.7. Catchwords, Signatures, Secundo Folio] The element should not be used outside of msDesc. (stamp) contains a word or phrase describing a stamp or similar device. [10.3.3. Watermarks and Stamps] (watermark) contains a word or phrase describing a watermark or similar device. [10.3.3. Watermarks and Stamps] (manuscript identifier) contains the information required to identify the manuscript or similar object being described. [10.4. The Manuscript Identifier] An msIdentifier must contain either a repository or location. (institution) contains the name of an organization such as a university or library, with which a manuscript or other object is identified, generally its holding institution. [10.4. The Manuscript Identifier] (repository) contains the name of a repository within which manuscripts or other objects are stored, possibly forming part of an institution. [10.4. The Manuscript Identifier] (collection) contains the name of a collection of manuscripts or other objects, not necessarily located within a single repository. [10.4. The Manuscript Identifier] (alternative identifier) contains an alternative or former structured identifier used for a manuscript or other object, such as a former catalogue number. [10.4. The Manuscript Identifier] (alternative name) contains any form of unstructured alternative name used for a manuscript or other object, such as an ocellus nominum, or nickname. [10.4. The Manuscript Identifier] (colophon) contains the colophon of an item: that is, a statement providing information regarding the date, place, agency, or reason for production of the manuscript or other object. [10.6.1. The msItem and msItemStruct Elements] (explicit) contains the explicit of a item, that is, the closing words of the text proper, exclusive of any rubric or colophon which might follow it. [10.6.1. The msItem and msItemStruct Elements] (filiation) contains information concerning the manuscript or other object's filiation, i.e. its relationship to other surviving manuscripts or other objects of the same text or contents, its protographs, antigraphs and apographs. [10.6.1. The msItem and msItemStruct Elements] (final rubric) contains the string of words that denotes the end of a text division, often with an assertion as to its author and title, usually set off from the text itself by red ink, by a different size or type of script, or by some other such visual device. [10.6.1. The msItem and msItemStruct Elements] contains the incipit of a manuscript or similar object item, that is the opening words of the text proper, exclusive of any rubric which might precede it, of sufficient length to identify the work uniquely; such incipits were, in former times, frequently used a means of reference to a work, in place of a title. [10.6.1. The msItem and msItemStruct Elements] (manuscript contents) describes the intellectual content of a manuscript, manuscript part, or other object either as a series of paragraphs or as a series of structured manuscript items. [10.6. Intellectual Content] (manuscript item) describes an individual work or item within the intellectual content of a manuscript, manuscript part, or other object. [10.6.1. The msItem and msItemStruct Elements] (structured manuscript item) contains a structured description for an individual work or item within the intellectual content of a manuscript, manuscript part, or other object. [10.6.1. The msItem and msItemStruct Elements] (rubric) contains the text of any rubric or heading attached to a particular manuscript item, that is, a string of words through which a manuscript or other object signals the beginning of a text division, often with an assertion as to its author and title, which is in some way set off from the text itself, typically in red ink, or by use of different size or type of script, or some other such visual device. [10.6.1. The msItem and msItemStruct Elements] contains an overview of the available information concerning some aspect of an item or object (for example, its intellectual content, history, layout, typography etc.) as a complement or alternative to the more detailed information carried by more specific elements. [10.6. Intellectual Content] (physical description) contains a full physical description of a manuscript, manuscript part, or other object optionally subdivided using more specialized elements from the model.physDescPart class. [10.7. Physical Description] (object description) contains a description of the physical components making up the object which is being described. [10.7.1. Object Description] (form) a short project-specific name identifying the physical form of the carrier, for example as a codex, roll, fragment, partial leaf, cutting etc. [^\p{C}\p{Z}]+ (support description) groups elements describing the physical support for the written part of a manuscript or other object. [10.7.1. Object Description] (material) a short project-defined name for the material composing the majority of the support Suggested values include: 1] paper; 2] parch (parchment); 3] mixed paper parch (parchment) mixed [^\p{C}\p{Z}]+ (support) contains a description of the materials etc. which make up the physical support for the written part of a manuscript or other object. [10.7.1. Object Description] (collation) contains a description of how the leaves, bifolia, or similar objects are physically arranged. [10.7.1. Object Description] (foliation) describes the numbering system or systems used to count the leaves or pages in a codex or similar object. [10.7.1.4. Foliation] (condition) contains a description of the physical condition of the manuscript or object. [10.7.1.5. Condition] (layout description) collects the set of layout descriptions applicable to a manuscript or other object. [10.7.2. Writing, Decoration, and Other Notations] (layout) describes how text is laid out on the page or surface of the object, including information about any ruling, pricking, or other evidence of page-preparation techniques. [10.7.2. Writing, Decoration, and Other Notations] (columns) specifies the number of columns per page (textual streams) indicates the number of streams per page, each of which contains an independent textual stream (ruled lines) specifies the number of ruled lines per column (written lines) specifies the number of written lines per column (description of hands) contains a description of all the different hands used in a manuscript or other object. [10.7.2. Writing, Decoration, and Other Notations] (hands) specifies the number of distinct hands identified within the manuscript (typeface description) contains a description of the typefaces or other aspects of the printing of an incunable or other printed source. [10.7.2.1. Writing] (typographic note) describes a particular font or other significant typographic feature distinguished within the description of a printed resource. [10.7.2. Writing, Decoration, and Other Notations] contains a description of the scripts used in a manuscript or other object. [10.7.2.1. Writing] (music notation) contains description of type of musical notation. [10.7.2. Writing, Decoration, and Other Notations] (decoration description) contains a description of the decoration of a manuscript or other object, either as in paragraphs, or as one or more <decoNote> elements. [10.7.3. Bindings, Seals, and Additional Material] (note on decoration) contains a note describing either a decorative component of a manuscript or other object, or a fairly homogenous class of such components. [10.7.3. Bindings, Seals, and Additional Material] (additions) contains a description of any significant additions found within a manuscript or other object, such as marginalia or other annotations. [10.7.2. Writing, Decoration, and Other Notations] (binding description) describes the present and former bindings of a manuscript or other object, either as a series of paragraphs or as a series of distinct <binding> elements, one for each binding of the manuscript. [10.7.3.1. Binding Descriptions] (binding) contains a description of one binding, i.e. type of covering, boards, etc. applied to a manuscript or other object. [10.7.3.1. Binding Descriptions] (contemporary) specifies whether or not the binding is contemporary with the majority of its contents unknown inapplicable (seal description) describes the seals or similar items related to the object described, either as a series of paragraphs or as a series of <seal> elements. [10.7.3.2. Seals] (seal) contains a description of one seal or similar applied to the object described [10.7.3.2. Seals] (contemporary) specifies whether or not the seal is contemporary with the item to which it is affixed unknown inapplicable (accompanying material) contains details of any significant additional material which may be closely associated with the manuscript or object being described, such as non-contemporaneous documents or fragments bound in with it at some earlier historical period. [10.7.3.3. Accompanying Material] (history) groups elements describing the full history of a manuscript, manuscript part, or other object. [10.8. History] (origin) contains any descriptive or other information concerning the origin of a manuscript, manuscript part, or other object. [10.8. History] (provenance) contains any descriptive or other information concerning a single identifiable episode during the history of a manuscript, manuscript part, or other object after its creation but before its acquisition. [10.8. History] (acquisition) contains any descriptive or other information concerning the process by which a manuscript or manuscript part or other object entered the holding institution. [10.8. History] (additional) groups additional information, combining bibliographic information about a manuscript or other object, or surrogate copies of it, with curatorial or administrative information. [10.9. Additional Information] (administrative information) contains information about the present custody and availability of the manuscript or other object, and also about the record description itself. [10.9.1. Administrative Information] (recorded history) provides information about the source and revision status of the parent manuscript or object description itself. [10.9.1. Administrative Information] (source) describes the original source for the information contained with a manuscript or object description. [10.9.1.1. Record History] (custodial history) contains a description of a manuscript or other object's custodial history, either as running prose or as a series of dated custodial events. [10.9.1.2. Availability and Custodial History] (custodial event) describes a single event during the custodial history of a manuscript or other object. [10.9.1.2. Availability and Custodial History] (surrogates) contains information about any representations of the manuscript or other object being described which may exist in the holding institution or elsewhere. [10.9. Additional Information] (manuscript part) contains information about an originally distinct manuscript or part of a manuscript, which is now part of a composite manuscript. [10.10. Manuscript Parts] (manuscript fragment) contains information about a fragment described in relation to a prior context, typically as a description of a virtual reconstruction of a manuscript or other object whose fragments were catalogued separately [10.11. Manuscript Fragments] supplies the value of a date or time in a standard form. [0-9.,DHMPRSTWYZ/:+\-]+ specifies the earliest possible date for the event in standard form, e.g. yyyy-mm-dd. [0-9.,DHMPRSTWYZ/:+\-]+ specifies the latest possible date for the event in standard form, e.g. yyyy-mm-dd. [0-9.,DHMPRSTWYZ/:+\-]+ indicates the starting point of the period in standard form. [0-9.,DHMPRSTWYZ/:+\-]+ indicates the ending point of the period in standard form. [0-9.,DHMPRSTWYZ/:+\-]+ (organization name) contains an organizational name. [13.2.2. Organizational Names] (certainty) signifies the degree of certainty associated with the intervention or interpretation. high There is a high degree of certainty about this organization moderate There is a moderate degree of certainty about this organization low There is a low degree of certainty about this organization unknown Identification is speculative may be used to specify further information about the entity referenced by this name in the form of a set of whitespace-separated values, for example the occupation of a person, or the status of a place. alderman ambassador animalKeeper baker barber blacksmith brewer butcher carpenter churchwarden clericalWorker clothWorker commercialOffice includes officers within guilds and companies cooper deliveryPerson draper fletcher gardener glover goldsmith governmentalOffice includes royal appointments, councillors, solicitor/attourneys general, etc. haberdasher hospitality ironmonger instrumentMaker judge lawyer legalOffice manualLabourer mason masterRevels mayor medicalDoctor memberParliament mercer merchant merchantTaylor messenger metalWorker musician parishClerk performanceOffice includes bearwards, masters of game, directors of choirs, etc. performer plumber religiousOffice includes abbots, cardinals, bishops, etc. salter scrivener servant sexWorker sheriff singer skinner stationer surveyor tailor transportationWorker vintner wait writer (personal name) contains a proper noun or proper-noun phrase referring to a person, possibly including one or more of the person's forenames, surnames, honorifics, added names, etc. [13.2.1. Personal Names] (certainty) signifies the degree of certainty associated with the intervention or interpretation. high There is a high degree of certainty about this person moderate There is a moderate degree of certainty about this person low There is a low degree of certainty about this person unknown The person is unknown may be used to specify further information about the entity referenced by this name in the form of a set of whitespace-separated values, for example the occupation of a person, or the status of a place. alderman ambassador animalKeeper baker barber blacksmith brewer butcher carpenter churchwarden clericalWorker clothWorker commercialOffice includes officers within guilds and companies cooper deliveryPerson draper fletcher gardener glover goldsmith governmentalOffice includes royal appointments, councillors, solicitor/attourneys general, etc. haberdasher hospitality ironmonger instrumentMaker judge lawyer legalOffice manualLabourer mason masterRevels mayor medicalDoctor memberParliament mercer merchant merchantTaylor messenger metalWorker musician parishClerk performanceOffice includes bearwards, masters of game, directors of choirs, etc. performer plumber religiousOffice includes abbots, cardinals, bishops, etc. salter scrivener servant sexWorker sheriff singer skinner stationer surveyor tailor transportationWorker vintner wait writer (surname) contains a family (inherited) name, as opposed to a given, baptismal, or nick name. [13.2.1. Personal Names] (forename) contains a forename, given or baptismal name. [13.2.1. Personal Names] (generational name component) contains a name component used to distinguish otherwise similar names on the basis of the relative ages or generations of the persons named. [13.2.1. Personal Names] (additional name) contains an additional name component, such as a nickname, epithet, or alias, or any other descriptive phrase used within a personal name. [13.2.1. Personal Names] (role name) contains a name component which indicates that the referent has a particular role or position in society, such as an official title or rank. [13.2.1. Personal Names] (place name) contains an absolute or relative place name. [13.2.3. Place Names] (certainty) signifies the degree of certainty associated with the intervention or interpretation. high There is a high degree of certainty about this place moderate There is a moderate degree of certainty about this place low There is a low degree of certainty about this place unknown The place is unknown may be used to specify further information about the entity referenced by this name in the form of a set of whitespace-separated values, for example the occupation of a person, or the status of a place. placeCommerce placeEducation placeEntertainment placeLegalActivity placePunishment placeReligiousActivity characterizes the element in some sense, using any convenient classification scheme or typology. arena bar barrier bodyOfWater bookshop bridge brothel building chapel church churchHouse diocese garden gate hall hill hospital innCourt institution landFeature liberty manor market monument neighbourhood outdoorSpace palace parish playhouse prison religiousHouse residence riversideFeature road room school shop stairs street victuallingHouse wall ward (settlement) contains the name of a settlement such as a city, town, or village identified as a single geo-political or administrative unit. [13.2.3. Place Names] (geographical name) identifies a name associated with some geographical feature such as Windrush Valley or Mount Sinai. [13.2.3. Place Names] (affiliation) contains an informal description of a person's present or past affiliation with some organization, for example an employer or sponsor. [15.2.2. The Participant Description] characterizes the element in some sense, using any convenient classification scheme or typology. Sample values include: 1] sponsor; 2] recommend; 3] discredit; 4] pledged [^\p{C}\p{Z}]+ (event) contains data relating to any kind of significant event associated with a person, place, or organization. [13.3.1. Basic Principles] characterizes the element in some sense, using any convenient classification scheme or typology. bibliographical biographical cultural environmental financial legal literary political religious social (list of events) contains a list of descriptions, each of which provides information about an identifiable event. [13.3.1. Basic Principles] provides information about relationships identified amongst people, places, and organizations, either informally as prose or as formally expressed relation links. [13.3.2.3. Personal Relationships] (occupation) contains an informal description of a person's trade, profession or occupation. [15.2.2. The Participant Description] characterizes the element in some sense, using any convenient classification scheme or typology. Sample values include: 1] primary; 2] other; 3] paid; 4] unpaid [^\p{C}\p{Z}]+ indicates the classification system or taxonomy in use, for example by supplying the identifier of a <taxonomy> element, or pointing to some other resource. identifies an occupation code defined within the classification system or taxonomy defined by the @scheme attribute. (place) contains data about a geographic location [13.3.4. Places] (relationship) describes any kind of relationship or linkage amongst a specified group of places, events, persons, objects or other items. [13.3.2.3. Personal Relationships] One of the attributes 'name', 'ref' or 'key' must be supplied Only one of the attributes @active and @mutual may be supplied the attribute 'passive' may be supplied only if the attribute 'active' is supplied supplies a name for the kind of relationship of which this is an instance. [^\p{C}\p{Z}]+ identifies the active participants in a non-mutual relationship, or all the participants in a mutual one. supplies a list of participants amongst all of whom the relationship holds equally. identifies the passive participants in a non-mutual relationship. (state) contains a description of some status or quality attributed to a person, place, or organization often at some specific time or for a specific date range. [13.3.1. Basic Principles 13.3.2.1. Personal Characteristics] (trait) contains a description of some status or quality attributed to a person, place, or organization typically, but not necessarily, independent of the volition or action of the holder and usually not at some specific time or for a specific date range. [13.3.1. Basic Principles 13.3.2.1. Personal Characteristics] (name of an object) contains a proper noun or noun phrase used to refer to an object. [13.2.4. Object Names] characterizes the element in some sense, using any convenient classification scheme or typology. cloth animal_supplies animal transportation food costume fuel torch instrument clothing other contains literal code from some formal language such as a programming language. [22.1.1. Phrase Level Terms] (formal language) a name identifying the formal language in which the code is expressed [^\p{C}\p{Z}]+ (TEI document) contains a single TEI-conformant document, combining a single TEI header with one or more members of the model.resource class. Multiple <TEI> elements may be combined within a <TEI> (or <teiCorpus>) element. [4. Default Text Structure 15.1. Varieties of Composite Text] specifies the version number of the TEI Guidelines against which this document is valid. [\d]+(\.[\d]+){0,2} (text) contains a single text of any kind, whether unitary or composite, for example a poem or drama, a collection of essays, a novel, a dictionary, or a corpus sample. [4. Default Text Structure 15.1. Varieties of Composite Text] characterizes the element in some sense, using any convenient classification scheme or typology. Suggested values include: 1] record record The text in this case is a REED record [^\p{C}\p{Z}]+ (text body) contains the whole body of a single unitary text, excluding any front or back matter. [4. Default Text Structure] (group) contains the body of a composite text, grouping together a sequence of distinct texts (or groups of such texts) which are regarded as a unit for some purpose, for example the collected works of an author, a sequence of prose essays, etc. [4. Default Text Structure 4.3.1. Grouped Texts 15.1. Varieties of Composite Text] (floating text) contains a single text of any kind, whether unitary or composite, which interrupts the text containing it at any point and after which the surrounding text resumes. [4.3.2. Floating Texts] characterizes the element in some sense, using any convenient classification scheme or typology. Suggested values include: 1] record record The text in this case is a REED record [^\p{C}\p{Z}]+ (text division) contains a subdivision of the front, body, or back of a text. [4.1. Divisions of the Body] Abstract model violation: Lines may not contain higher-level structural elements such as div, unless div is a descendant of floatingText. Abstract model violation: p and ab may not contain higher-level structural elements such as div, unless div is a descendant of floatingText. characterizes the element in some sense, using any convenient classification scheme or typology. Suggested values include: 1] appendix; 2] endnote; 3] transcription; 4] translation; 5] other appendix This REED division is for the Appendix section endnote This REED division is an endnote section transcription This REED division is a transcription translation This REED division is a translation other This REED division is something else. (If you use this more than a handful of times we should update the TEI ODD Customisation.) [^\p{C}\p{Z}]+ contains a closing title or footer appearing at the end of a division of a text. [4.2.4. Content of Textual Divisions 4.2. Elements Common to All Divisions] (closer) groups together salutations, datelines, and similar phrases appearing as a final group at the end of a division, especially of a letter. [4.2.2. Openers and Closers 4.2. Elements Common to All Divisions] (salutation) contains a salutation or greeting prefixed to a foreword, dedicatory epistle, or other division of a text, or the salutation in the closing of a letter, preface, etc. [4.2.2. Openers and Closers] (signature) contains the closing salutation, etc., appended to a foreword, dedicatory epistle, or other division of a text. [4.2.2. Openers and Closers] (front matter) contains any prefatory matter (headers, abstracts, title page, prefaces, dedications, etc.) found at the start of a document, before the main body. [4.6. Title Pages 4. Default Text Structure] (back matter) contains any appendixes, etc. following the main part of a text. [4.7. Back Matter 4. Default Text Structure] (facsimile) points to one or more images, portions of an image, or surfaces which correspond to the current element. indicates the element within a transcription of the text containing at least the start of the writing represented by this zone or surface. gives the x coordinate value for the upper left corner of a rectangular space. (\-?[\d]+/\-?[\d]+) gives the y coordinate value for the upper left corner of a rectangular space. (\-?[\d]+/\-?[\d]+) gives the x coordinate value for the lower right corner of a rectangular space. (\-?[\d]+/\-?[\d]+) gives the y coordinate value for the lower right corner of a rectangular space. (\-?[\d]+/\-?[\d]+) identifies a two dimensional area by means of a series of pairs of numbers, each of which gives the x,y coordinates of a point on a line enclosing the area. (-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?) (-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?) (-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?) (-?[0-9]+(\.[0-9]+)?,-?[0-9]+(\.[0-9]+)?) contains a representation of some written source in the form of a set of images rather than as transcribed or encoded text. [11.1. Digital Facsimiles] defines a written surface as a two-dimensional coordinate space, optionally grouping one or more graphic representations of that space, zones of interest within that space, and transcriptions of the writing within them. [11.1. Digital Facsimiles 11.2.2. Embedded Transcription] describes the method by which this surface is or was connected to the main surface Sample values include: 1] glued; 2] pinned; 3] sewn [^\p{C}\p{Z}]+ indicates whether the surface is attached and folded in such a way as to provide two writing surfaces (added span of text) marks the beginning of a longer sequence of text added by an author, scribe, annotator or corrector (see also <add>). [11.3.1.4. Additions and Deletions] The @spanTo attribute of is required. L'attribut spanTo est requis. (damage) contains an area of damage to the text witness. [11.3.3.1. Damage, Illegibility, and Supplied Text] characterizes the element in some sense, using any convenient classification scheme or typology. Suggested values include: 1] hole; 2] other hole This damage is characterised by REED as a hole other This damage is characterised by REED as something else. (If you use this more than a handful of times we should update the TEI ODD Customisation.) [^\p{C}\p{Z}]+ categorizes the cause of the damage, if it can be identified. Suggested values include: 1] bookbinding; 2] creasing; 3] creasing_tearing; 4] cropping; 5] erasure; 6] fading; 7] smudging; 8] tearing; 9] wearing; 10] other bookbinding The agent of the damage was bookbinding creasing The agent of the damage was creasing creasing_tearing The agent of the damage was creasing/tearing cropping The agent of the damage was cropping erasure The agent of the damage was erasure fading The agent of the damage was fading smudging The agent of the damage was smudging tearing The agent of the damage was tearing wearing The agent of the damage was wearing other There is some other sort of agent for this damage. (If you use this more than a handful of times we should update the TEI ODD Customisation.) [^\p{C}\p{Z}]+ (deleted span of text) marks the beginning of a longer sequence of text deleted, marked as deleted, or otherwise signaled as superfluous or spurious by an author, scribe, annotator, or corrector. [11.3.1.4. Additions and Deletions] The @spanTo attribute of is required. L'attribut spanTo est requis. (editorial expansion) contains a sequence of letters added by an editor or transcriber when expanding an abbreviation. [11.3.1.2. Abbreviation and Expansion] (forme work) contains a running head (e.g. a header, footer), catchword, or similar material appearing on the current page. [11.6. Headers, Footers, and Similar Matter] classifies the material encoded according to some useful typology. Suggested values include: 1] catch; 2] other catch The forme work for this REED record was a catchword other There is some other sort of formework. (If you use this more than a handful of times we should update the TEI ODD Customisation.) [^\p{C}\p{Z}]+ specifies where this item is placed. Suggested values include: 1] bottom; 2] left; 3] right; 4] top bottom The forme work for this REED record was at the foot of the page left The forme work for this REED record was in the left margin right The forme work for this REED record was in the right margin top The forme work for this REED record was at the top of the page [^\p{C}\p{Z}]+ (handwriting shift) marks the beginning of a sequence of text written in a new hand, or the beginning of a scribal stint. [11.3.2.1. Document Hands] indicates a <handNote> element describing the hand concerned. (abbreviation marker) contains a sequence of letters or signs present in an abbreviation which are omitted or replaced in the expanded form of the abbreviation. [11.3.1.2. Abbreviation and Expansion] (space) indicates the location of a significant space in the text. [11.4.1. Space] (responsible party) (responsible party) indicates the individual responsible for identifying and measuring the space (dimension) indicates whether the space is horizontal or vertical. horizontal the space is horizontal. vertical the space is vertical. (substitution) groups one or more deletions (or surplus text) with one or more additions when the combination is to be regarded as a single intervention in the text. [11.3.1.5. Substitutions] must have at least one child add and at least one child del or surplus (supplied) signifies text supplied by the transcriber or editor for any reason; for example because the original cannot be read due to physical damage, or because of an obvious omission by the author or scribe. [11.3.3.1. Damage, Illegibility, and Supplied Text] one or more words indicating why the text has had to be supplied, e.g. overbinding, faded-ink, lost-folio, omitted-in-original. [^\p{C}\p{Z}]+ (surplus) marks text present in the source which the editor believes to be superfluous or redundant. [11.3.3.1. Damage, Illegibility, and Supplied Text] one or more words indicating why this text is believed to be superfluous, e.g. repeated, interpolated etc. [^\p{C}\p{Z}]+